Determination of the partial electron capture- and spontaneous-fission half-lives of254No

The isotope²⁵⁴No was produced in the fusion reaction⁴⁸Ca +²⁰⁸Pb. Using the velocity filter SHIP and radiochemical techniques it was found that the nuclide²⁵⁴No with a half-life of 55 s decays byα, EC, and spontaneous-fission. Deduced partial half-lives are (61±2) s forα-decay, (550 _?160 ⁺³⁷⁰ ) s for EC and [2.2 _?1.0 ^+2.0 ]×10⁴ s for spontaneous fission.     

Semi-insulating electrical properties of undoped inp after heat treatment in a phosphorus atmosphere

Nominally undoped InP wafers have been annealed in a phosphorus atmosphere under a pressure of about 5 bar at temperatures of 900 °C for about 80 h. It was found that the electrical properties of the samples changed considerably after this treatment. A room temperature resistivity of up to 2×10⁷cm (semi-insulating behaviour) was obtained in the bulk of the samples. The resistivity finally obtained depends on the starting carrier concentration of the untreated samples. The Hall coefficient and Hall mobility have been measured up to 600 °C. The results can be interpreted in terms of a deep electronic level (E _A=0.63 ... 0.65 eV below the conduction band). The Hall coefficient was always found to be negative resulting in a Hall mobility of 1.4 to 4.9×10³ cm²/Vs. The highest resistivity in nominally undoped bulk InP so far reported in the literature [1] was =3.6 × 10⁵cm. Therefore, this paper demonstrates for the first time that a really semi-insulating behaviour of >10⁷ cm can be achieved for bulk InP with the purity of nominally undoped material (10¹⁵ to 10¹⁶cm^–3).     

金属硫蛋白加质子常数及与Cd(II)络合常数测定

用pH计和Cd离子选择电极测定了金属硫蛋白的加质子常数及其与Cd(Ⅱ)的络合常数, 用改进的简化络合模型处理实验结果, 得到了去金属硫蛋白(apo MT)中6类不同的加质子基团的数目及其加质子常数。对Cd(Ⅱ)滴定数据的计算表明, MT中两个结构域——α和β对Cd(Ⅱ)的络合常数相差约1000倍。从热力学定量描述了MT中两个结构域结合金属离子选择优先顺序。     

Diels-Alder chemistry on alkene functionalized films

A substrate-independent method has been devised for ring formation at solid surfaces. This entails the aminolysis reaction of allylamine with maleic anhydride pulsed plasma polymer films to yield terminal alkene groups at the surface. Subsequent exposure to 1,3-cyclohexadiene leads to a Diels-Alder type (4 + 2) cycloaddition reaction to give a mixture of endo- and exo-bicyclo[2.2.2]oct-2-ene rings.     

Dehydrochlorination of monodisperse poly(vinylidene chloride) latex

The objective of the work described in this paper was to produce dispersions of small spherical carbon particles, having particle diameters in the region of 0.1 μm. To this end, the dehydrochlorination of poly(vinylidene chloride) (PVDC) latex particles was attempted. The PVDC latex was prepared by a dispersion polymerization route. Both chemical and thermal dehydrochlorination routes were attempted. Chemical dehydrochlorination, using a variety of base/solvent systems, led to nonporous, spherical black particles of the required size, but which contained only 60% carbon; most of the remainder was oxygen, introduced by nucleophilic substitution reactions. Thermal dehydrochlorination, at 700°C under a nitrogen atmosphere, using a fluidized bed arrangement, on the other hand, led to black particles, having 90% carbon and which retained their sphericity, but which were highly porous. Initial chemical dehydrochlorination, prior to thermal treatment, did not seem to reduce the porosity of the final carbons. Dispersions of the carbon particles in a variety of solvents were readily achieved.     

Dispersion effects of laminar flow and spray chamber volume in capillary electrophoresis-inductively coupled plasma-mass spectrometry: a numerical and experimental approach

Band broadening related to laminar flow and spray chamber dead volume is a potential problem in flow injection (FI)-inductively coupled plasma-mass spectrometry (ICP-MS). We studied these two dispersion effects with a sheath flow capillary electrophoresis (CE)-ICP-MS interface. A numerical model was used to simulate advection diffusion processes in the CE-capillary and dispersion in the spray chamber. Experimental results of FI with this CE-ICP-MS interface agree well with numerical modeling results. Dispersion due to laminar flow depends strongly on capillary diameter and analyte diffusion coefficient and to a lesser extent on laminar velocity and capillary length and typically amounts to one order of magnitude peak width increase. Three spray chambers of 5, 20 and 150 ml dead volume showed an increase in band broadening and peak tailing with increasing dead volume. The use of standard Scott-type spray chambers (>90 ml volume) increases peak widths by 5-10 s regardless of injection time. The use of a low dead volume spray chamber is recommended for experiments where resolution is critical. The modeling approach can be extended to the coupling of other flow injection techniques, like micro-LC and nano-LC with ICP-MS.     

新显色剂4,4''''-对偶氮苯重氮氨基偶氮苯光度法测定溴化十六烷基三甲铵

研究了新显色剂4,4'-对偶氮苯重氮氨基偶氮苯与溴化十六烷基三甲铵(CTMAB)的显色反应.结果表明,在0.5mol·L-1 NaOH介质中,显色剂与CTMAB发生灵敏的显色反应,形成11的紫红色缔合物,其最大吸收波为575 nm,表观摩尔吸光系数为5.02×104L·mol-1·cm-1,CTMAB的含量在0～100μg/25 mL范围内遵守比耳定律.据此建立了水中微量CTMAB的光度测定方法.该法是目前测定微量CTMAB的高灵敏方法之一.在EDTA存在下,显色反应具有良好的选择性,可直接用于环境水样的分析.     

锐钛矿型纳米TiO2介孔粉体表面织构的研究

以硫酸钛和尿素为原料,聚乙二醇-1000为空间构造剂,104℃下经尿素水解均匀沉淀法研制颗粒分散均匀、粒径可控的高热稳定性锐钛矿型纳米TiO2介孔粉体,并对其晶相、颗粒大小、比表面积、形貌和孔道结构进行了表征.结果表明,未经任何热处理的TiO2粉体即为锐钛型晶相,颗粒为均匀分散的类球型颗粒,且颗粒间形成直通型的介孔孔道,其孔径在10～30nm之间.控制焙烧温度可以达到控制颗粒大小及形貌的目的,经850℃焙烧5h的样品仍保持锐钛矿型晶相,未出现向金红石型晶相转变的迹象.     

STUDY ON THE SYNTHESIS OF A NEW TYPE OF PHOSPHORUS HETEROCYCLIC COMPOUNDS-PYRAZOLO[3, 4-d]-1, 3, 2-DIAZAPHOSPHORIN-6-ONE

1-substituted-5-benzoylamino-4-pyrazolecarboxamides(2)were prepared by the reaction of 1-substituted pyrazolo[3, 4-d]-oxazinone(1)with amines in benzene.The compound 2 was refluxed with excess LiAlH₄ in a mixture of THF and ether, one of the two carbamoyl groups in the molecule 2 was reduced selectively.As the results, 1-substituted-5-benzylamino-4-pyrazolecarboxamides (3) were obtained.Compounds 3reacted with Cl₂PPh-X, or P(NET₂)3, producing the title compounds(4).The conditions of the reactions were studied.     

The complexation of apo-metallothionein with cadmium ion and its conformation study

The circular dichroism was used to study the complexation of two isoforms of rabbit liver apo-metallothioneins (apo-MT1 and apo-MT2) with Cd²⁺ ion and the influence of Cd²⁺ ion on the conformation of reconstituted MTs. The stability of sulfhydryls of apo-MT has been investigated at the room temperature in the presence of air. The reconstitutions of apo-MT1 with Cd²⁺ ion were carried out atpH 4.71 (stable state) andpH 7.9 (with 90% sulfhydryls oxidated) respectively. it was found that the characteristic CD band at 257 nm(+), 238 nm(?), 226 nm(+) of reconstituted MT with Cd²⁺ ion was the same as native MT atpH 4.71, however only one peak at 243 nm(+) appeared on the CD spectra atpH 7.9 which arose from mononuclear complexes with four separated thiolate ligands per Cd²⁺ ion. The CD spectra of apo-MTs+7 eq Cd²⁺ system were measured at variouspH values. It was found that the peak at 256 nm of apo-MT1 binding Cd²⁺ ion split into two small peaks atpH between 2.42 and 3.02, and became one peak atpH 3.32, while the shapes of Cd peaks of apo-MT2 binding Cd²⁺ ion did not change withpH, indicating that the binding sites and pathway of apo-MT1 binding Cd²⁺ ion were different from those of apo-MT2. A possible mechanism was suggested.